Back to products
Norton Gearbox Top Fixing Bolt
Price range: £12.50 through £13.50
Norton Gearbox Lower Fixing Stud
Price range: £9.60 through £10.50
Gearbox lower fixing stud with small hex full nuts. & washers. Suitable for Norton AMC gearboxes.
Description
Gearbox lower fixing stud with small hex full nuts. & washers. Suitable for Norton AMC gearboxes.
Choose fitment:
- Standard length 4-1/2″.
- Increased length, 5″ for 8mm engine plates.
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 5 × 1 × 1 in |
| Brand |
Norton |
| Finish |
Machine |
| Fits |
Commando-750 ,Commando-850 ,Dominator ,Norton-350-750-Singles ,Norton-350-750-Twins |
| Makes |
Stainless Classics |
| Select Length: |
Standard 4-1/2" ,5" |
You may also like…
Related products
Late Norton Dominator Brake Rod Assembly
Complete brake rod assembly for Norton "88 & "99" Dominators, 500SS, and 650SS, also Atlas and Mercury models. It is also correct for the Featherbed framed Singles, ES2 and Model 50. It comes with the "flag" that operates the original type of stop-lamp switch, but this can be rotated to fix it in the ideal position for the switch.
Lightweight Norton Brake Rod Assembly
Complete brake rod assembly for Jubilee, Navigator and Electra. This type has a winged brake adjuster, and the original shape of clevis joint. Because the frame and cycle parts were developed from Francis Barnet, and James motorcycles, it may be found correct for some of these as well. Overall length: 21-1/2"
Silencer Clamp 1-3/4″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters
Winged Brake Adjuster
This brake rod adjuster is suitable for early Norton Singles, and the Lightweight range such as Jubilee and Navigator from the 1960?s, and indeed for
the AMC two-stroke models (Francis Barnet and James) from the 1950?s and early 1960?s. This kind of adjuster was common on other makes, as well. Made on new tooling.
Thread size: 1/4?- BSF Length: 1.14? (29mm)
Width Over Wings: 1-3/8? (35mm)
