Shouldered Brake Trunnion - Image 1
Shouldered Brake Trunnion - Image 2
Shouldered Brake Trunnion - Image 3
Click to enlarge
Shouldered Brake Trunnion
Shouldered Brake Trunnion - Image 2
Shouldered Brake Trunnion - Image 3
BSA A50/65 Adjuster Cap
BSA A50/65 Adjuster Cap £7.20
Back to products
Norton Brake Dummy Spindle
Norton Brake Dummy Spindle £40.00
BSA Triumph

Shouldered Brake Trunnion

£8.20

Shouldered brake  trunnion with hole for brake rod.  Suitable for most BSA and Triumph conical hub models.

42 in stock

Compare
Add to wishlist
SKU: W1467 Categories: , , , , Tag:
Description

Shouldered brake  trunnion with hole for brake rod.  Suitable for most BSA and Triumph conical hub models.

Related products

Compare

A10 Gold Star Fork Top Nut

,
£14.50

These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle (full width)

,
£41.80

This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Add to basket
Quick view