BSA A7 and A10 Tappet Inspection Cover Stud - Image 1
Click to enlarge
Timing Cover Socket Cap Screw Kit: BSA A7 & A10
Timing Cover Socket Cap Screw Kit: BSA A7 & A10 £10.00
Back to products
Tappet Inspection Cover Nuts: BSA A7 & A10
Tappet Inspection Cover Nuts: BSA A7 & A10 £18.60

BSA A7 and A10 Tappet Inspection Cover Stud

£2.50

These studs are for fixing the rocker inspection cover on the A7, A10 and RGS twins.

Eight are required, sold individually.

BSW/BSF threads.

11 in stock

Compare
Add to wishlist
SKU: 31-0222 Categories: , Tags: , ,
Description

These studs are for fixing the rocker inspection cover on the A7, A10 and RGS twins.

Eight are required, sold individually.

BSW/BSF threads.

Related products

Compare

A65 Rear Sprocket Bolt Set

,
£26.00

Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA Lower Yoke Bolts

,
Price range: £7.20 through £15.70

Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135.

Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.

Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Add to basket
Quick view