BSA Brake Rod Spring - Image 1
BSA Brake Rod Spring - Image 2
Click to enlarge
BSA Brake Rod Spring
BSA Brake Rod Spring - Image 2
Early Norton CSK Screw
Early Norton CSK Screw £4.50
Back to products
Custom Brake Rod Spring
Custom Brake Rod Spring Price range: £4.50 through £7.50
BSA Custom

BSA Brake Rod Spring

£3.00

Straight brake rod spring suitable typically used for BSA models, or custom brake rod options.

Spring is suitable to be used with 1/4″ rod.  3″ overall spring length.

12 in stock

Compare
Add to wishlist
SKU: BSA-BR-SPRING-3 Categories: , , , Tags: , ,
Description

Straight brake rod spring suitable typically used for BSA models, or custom brake rod options.

Spring is suitable to be used with 1/4″ rod.  3″ overall spring length.

Related products

Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle (full width)

,
£41.80

This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view