BSA and Triumph Fork Top Nut Washers - Image 1
Click to enlarge
A10 Gold Star Fork Top Nut
A10 Gold Star Fork Top Nut £14.50
Back to products
A65 Fork Top Nut Set
A65 Fork Top Nut Set £29.00
BSA

BSA and Triumph Fork Top Nut Washers

£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067″.

164 in stock

Compare
Add to wishlist
SKU: 65-5332 Categories: , Tags: , ,
Description

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067″.

You may also like…

Compare

A10 Gold Star Fork Top Nut

,
£14.50

These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Add to wishlist
Add to basket
Quick view
Compare

A65 Fork Top Nut Set

,
£29.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    BSA A7 & A10 Front Spindle Nut

    ,
    £6.50

    This nut is for the later A7 & A10 with the 8" full width hub.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamp Spacer

    ,
    £4.80

    These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00

    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Handlebar Clamp Screw – Long BSA

    ,
    £3.60

    These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Handlebar Clamp Screw BSA

    ,
    £2.80

    These are the normal short clamp screws, used on most models.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Backing Plate: BSA “A” & “B” Series Models

    ,
    £7.80

    The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

    Add to wishlist
    Add to basket
    Quick view