BSA Gold Star Oil Valve Screw - Image 1
BSA Gold Star Oil Valve Screw - Image 2
BSA Gold Star Oil Valve Screw - Image 3
BSA Gold Star Oil Valve Screw
BSA Gold Star Oil Valve Screw - Image 2
BSA Gold Star Oil Valve Screw - Image 3
BSA A7/A10 Front Chaincase Stud
BSA A7/A10 Front Chaincase Stud £2.50
Back to products
BSA Gold Star Breather Pipe
BSA Gold Star Breather Pipe £9.80
BSA

BSA Gold Star Oil Valve Screw

£8.75

BSA Gold Star, B31, B33 and B34 oil valve spring retaining screw / bolt.  1 required per engine.

34 in stock (can be backordered)

Compare
Add to wishlist
SKU: 65-2188 Categories: , , , ,
Description

BSA Gold Star, B31, B33 and B34 oil valve spring retaining screw / bolt.  1 required per engine.

Related products

Compare

A65 Rear Sprocket Bolt Set

,
£26.00

Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

Add to wishlist
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Sold out
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist