A10 Gold Star Fork Top Nut - Image 1
Steering Damper Knob Securing Plate-BSA
Steering Damper Knob Securing Plate-BSA £15.00
Back to products
BSA and Triumph Fork Top Nut Washers
BSA and Triumph Fork Top Nut Washers £5.00
BSA

A10 Gold Star Fork Top Nut

£14.50

These are nearly identical to the “A65”- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

23 in stock

Compare
Add to wishlist
SKU: 65-5331 Categories: , Tag:
Description

These are nearly identical to the “A65”- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Related products

Compare

A65 Fork Top Nut Set

,
£36.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Compare

A65 Rear Sprocket Bolt Set

,
£26.00

Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

Add to wishlist
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist