BSA Rear Brake Arm - Image 1
BSA Rear Brake Arm - Image 2
BSA Rear Brake Arm - Image 3
BSA Rear Brake Arm
BSA Rear Brake Arm - Image 2
BSA Rear Brake Arm - Image 3
BSA Thick Flange Barrel Stud Set
BSA Thick Flange Barrel Stud Set £26.00
Back to products
Norton Dominator Slimline Engine Stud Kit
Norton Dominator Slimline Engine Stud Kit £45.00
BSA

BSA Rear Brake Arm

£14.50

Polished rear brake arm / lever suitable for BSA A7 and A10 cable operated brakes.

13 in stock

Compare
Add to wishlist
SKU: 42-6353 Categories: , Tag:
Description

Polished rear brake arm / lever suitable for BSA A7 and A10 cable operated brakes.

Related products

Compare

A65 Fork Top Nut Set

,
£36.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Sold out
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50

This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.

Add to wishlist
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Compare

Steering Damper Knob Securing Plate-BSA

,
£15.00

This secures the adjuster knob in place after adjustment.

Add to wishlist