Steering Bearing Cover: BSA "A "& "B" Series Models - Image 1
BSA Lower Yoke Bolts
BSA Lower Yoke Bolts Price range: £7.20 through £15.70
Back to products
Steering Damper Backing Plate: BSA "A" & "B" Series Models
Steering Damper Backing Plate: BSA "A" & "B" Series Models £7.80

Steering Bearing Cover: BSA “A “& “B” Series Models

£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

28 in stock (can be backordered)

Compare
Add to wishlist
SKU: 66-5204 Categories: , Tags: , ,
Description

This cover washer is fitted under the top yoke, to cover the bearing.

You may also like…

Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Compare

BSA Lower Yoke Bolts

,
Price range: £7.20 through £15.70

Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135.

Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.

Add to wishlist
This product has multiple variants. The options may be chosen on the product page
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist

    Related products

    Compare

    A10 Gold Star Fork Top Nut

    ,
    £14.50

    These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

    Add to wishlist
    Compare

    A65 Fork Top Nut Set

    ,
    £36.00

    These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

    Add to wishlist
    Compare

    A65 Rear Sprocket Bolt Set

    ,
    £26.00

    Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

    Add to wishlist
    Compare

    BSA A7 & A10 Rear Dummy Spindle

    ,
    £35.00

    This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

    Add to wishlist
    Compare

    Front Brake Lever, 8″ Full Width Hub, A7 & A10

    ,
    £12.50

    This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

    Add to wishlist
    Compare

    Steering Stem Sleeve Cap: BSA “A “& “B”- Series Models

    ,
    £15.00

    This prominent feature is fitted at the top, middle of the steering column.

    Be careful, there are several smaller types that are fitted on earlier or smaller models.

    Add to wishlist
    Compare

    Steering Stem Sleeve Cap: BSA & Ariel: No Damper

    ,
    £15.00

    This cap is fitted on a few models where there is no need for a central hole, when no steering damper is fitted.  Otherwise, it is identical to the part fitted to later A10 and Gold Star.

    Add to wishlist
    Compare

    Steering Stem Sleeve Cap: BSA Late A65 & A50 Models

    ,
    £22.50

    This is fitted at the top of the steering column, on some late A65 models.  It is unusual, in that it incorporates the threaded part that would otherwise be fitted to the steering stem itself, inside the top nut.

    Add to wishlist