Norton Footrest Stud Dome Nut
£8.00
This dome nut for the footrest stud is sometimes used as an alternative the ordinary nuts which are usually used to hold on the footrests.
1 in stock
Description
This dome nut for the footrest stud is sometimes used as an alternative the ordinary nuts which are usually used to hold on the footrests.
Additional information
| Weight | 0.06 kg |
|---|---|
| Dimensions | 09 × 09 × 1 in |
| Finish |
Polished |
| Fits |
BSA A7/A10 ,BSA B31/34 ,BSA Gold Star |
| Makes |
Stainless Classics |
Related products
Lightweight Norton Brake Rod Assembly
Complete brake rod assembly for Jubilee, Navigator and Electra. This type has a winged brake adjuster, and the original shape of clevis joint. Because the frame and cycle parts were developed from Francis Barnet, and James motorcycles, it may be found correct for some of these as well. Overall length: 21-1/2"
Silencer Clamp 1-1/2″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
Winged Brake Adjuster
This brake rod adjuster is suitable for early Norton Singles, and the Lightweight range such as Jubilee and Navigator from the 1960?s, and indeed for
the AMC two-stroke models (Francis Barnet and James) from the 1950?s and early 1960?s. This kind of adjuster was common on other makes, as well. Made on new tooling.
Thread size: 1/4?- BSF Length: 1.14? (29mm)
Width Over Wings: 1-3/8? (35mm)
