Orders placed after Thursday 24th Sept will not be posted until the 6th October
Norton Front Brake Eyebolt
£13.75
Early Dominator and Featherbed International front brake adjuster and nut.
Related products
Late Norton Dominator Brake Rod Assembly
Complete brake rod assembly for Norton "88 & "99" Dominators, 500SS, and 650SS, also Atlas and Mercury models. It is also correct for the Featherbed framed Singles, ES2 and Model 50. It comes with the "flag" that operates the original type of stop-lamp switch, but this can be rotated to fix it in the ideal position for the switch.
Sold out
Norton Front Wheel Spindle ‘Round’ Type
Front wheel spindle 'round' type with 'tommy' bar hole.
Fitment:
- 7" wide yokes, 9/16-20 TPI = Pre-1964 narrow type forks (Dominator, ES2, etc ...) (20249)
- 7-3/8" wide yokes 9/16-20 TPI = Later Dominators 1964 onwards and AMC Hybrids (03-0055)
- 7-3/8" wide yokes 9/16-18 TPI = Commando and some very late Dominators
Silencer Clamp 1-3/4″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters
-14%
Winged Brake Adjuster
This brake rod adjuster is suitable for early Norton Singles, and the Lightweight range such as Jubilee and Navigator from the 1960?s, and indeed for
the AMC two-stroke models (Francis Barnet and James) from the 1950?s and early 1960?s. This kind of adjuster was common on other makes, as well. Made on new tooling.
Thread size: 1/4?- BSF Length: 1.14? (29mm)
Width Over Wings: 1-3/8? (35mm)
