Rear Spindle Washer For Ariel Type Rear Hub BSA A10, A7 - Image 1
Rear Hub Nuts For FWH BSA Rear Hub A10, A7
Rear Hub Nuts For FWH BSA Rear Hub A10, A7 £32.50
Back to products
Rear Spindle Washer For BSA FWH Type Rear Hub, A10, A7, N/S
Rear Spindle Washer For BSA FWH Type Rear Hub, A10, A7, N/S £2.40

Rear Spindle Washer For Ariel Type Rear Hub BSA A10, A7

£4.00

This washer (1″ I/D) is required under the head of  the rear spindle on the Ariel-type hub on the 1954-57 period A7 and A10, and some other models.

14 in stock

Compare
Add to wishlist
SKU: 42-6074 Categories: , Tags: ,
Description

This washer (1″ I/D) is required under the head of  the rear spindle on the Ariel-type hub on the 1954-57 period A7 and A10, and some other models.

Related products

Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Compare

BSA Lower Yoke Bolts

,
Price range: £7.20 through £15.70

Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135.

Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.

Add to wishlist
This product has multiple variants. The options may be chosen on the product page
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist