Triumph Sprung Hub Spindle Nut Set - Image 1
Triumph Sprung Hub Spindle Nut Set - Image 2
Triumph Sprung Hub Spindle Nut Set - Image 3
Click to enlarge
Triumph Sprung Hub Spindle Nut Set
Triumph Sprung Hub Spindle Nut Set - Image 2
Triumph Sprung Hub Spindle Nut Set - Image 3
Triumph Rigid Chain Adjuster Set
Triumph Rigid Chain Adjuster Set £24.00
Back to products
Set of Norton Commando Short Flasher / Indicator Stems
Set of Norton Commando Short Flasher / Indicator Stems £21.00

Triumph Sprung Hub Spindle Nut Set

£28.00

Suitable for Triumph sprung hub rear 11/16″ threaded spindles.  Set comprises of nuts (2-off), spacers (2-off).

Compare
Add to wishlist
SKU: tri-sprung-hub-spindle-nut-set Category:
Description

Suitable for Triumph sprung hub rear 11/16″ threaded spindles.  Set comprises of nuts (2-off), spacers (2-off).

Related products

Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Add to basket
Quick view