Front Brake Fulcrum For 7 & 8" (Single Sided) Front Hub BSA - Image 1
Click to enlarge
Front Brake Fulcrum For 190mm Front Hub BSA
Front Brake Fulcrum For 190mm Front Hub BSA £20.65
Back to products
Front Brake Fulcrum For 7 & 8" (Single Sided) Front Hub BSA (No Adj.)
Front Brake Fulcrum For 7 & 8" (Single Sided) Front Hub BSA (No Adj.) £18.50

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

£18.50

For 7 & 8″ Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16″-26 for the cable adjuster.

41 in stock

Compare
Add to wishlist
SKU: 67-5576 Categories: , Tags: ,
Description

For 7 & 8″ Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16″-26 for the cable adjuster.

Related products

Compare

A65 Rear Sprocket Bolt Set

,
£26.00

Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Nut

,
£6.50

This nut is for the later A7 & A10 with the 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view