Triumph Swingarm Pivot Spindle Bolt Set - Image 1
Triumph Swingarm Pivot Spindle Bolt Set - Image 2
Triumph Swingarm Pivot Spindle Bolt Set - Image 3
Click to enlarge
Triumph Swingarm Pivot Spindle Bolt Set
Triumph Swingarm Pivot Spindle Bolt Set - Image 2
Triumph Swingarm Pivot Spindle Bolt Set - Image 3
5/16" BSF x 1-3/4″ Socket Cap Bolt
5/16" BSF x 1-3/4″ Socket Cap Bolt £4.20
Back to products
Triumph Valve Inspection Cap Clip Set
Triumph Valve Inspection Cap Clip Set Price range: £10.00 through £14.80
Triumph

Triumph Swingarm Pivot Spindle Bolt Set

£17.50

Swing arm pivot bolt set (2-off), suitable for 350 and 500cc twins, T90, T100, Daytona between 1967 and 1974.  Fitted with hole tapped for grease nipple, situated on the drive side.

5 in stock

Compare
Add to wishlist
SKU: 21-0579 Categories: , , Tags: , , , ,
Description

Swing arm pivot bolt set (2-off), suitable for 350 and 500cc twins, T90, T100, Daytona between 1967 and 1974.  Fitted with hole tapped for grease nipple, situated on the drive side.

Related products

Compare

A65 Fork Top Nut Set

,
£36.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle (full width)

,
£41.80

This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view