Handlebar Clamp Screw - Long BSA - Image 1
Click to enlarge
Front Hub Spindle, Single Sided Hub BSA
Front Hub Spindle, Single Sided Hub BSA £32.00
Back to products
Handlebar Clamp Screw BSA
Handlebar Clamp Screw BSA £2.80

Handlebar Clamp Screw – Long BSA

£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

25 in stock (can be backordered)

Compare
Add to wishlist
SKU: 2-6026 Categories: , Tag:
Description

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Related products

Compare

A65 Fork Top Nut Set

,
£29.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Add to basket
Quick view
Compare

A65 Rear Sprocket Bolt Set

,
£26.00

Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Add to basket
Quick view
Compare

Crinkle Rear Hub Cover: BSA Gold Star

,
£28.00

Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50

This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.

Add to wishlist
Add to basket
Quick view