BSA and Triumph Air Filter Retaining Assembly
BSA and Triumph Centre Stand Bolt Set 7/16″
BSA Triumph 250cc OIF Engine Frame Set
BSA, BSA Centre Section and Cycle Parts, BSA Engine, Triumph Centre Section and Cycle Parts, Triumph Engine
The BSA (B25) and Triumph (T25) engine to frame kits is for all Oil In Frame (OIF) 250cc singles circa late 1970-1972. The kit secures the engine to the frame directly of via plates (e.g. head steady strap). Select items for a full or partial set as required.
Other BSA and Triumph single cylinder fasteners and products.
BSA Triumph LH Footrest Nut
BSA, BSA Centre Section and Cycle Parts, Nuts, CEI Nuts, Nuts and Bolts, Triumph, Triumph Centre Section and Cycle Parts
Double Adjuster Set Conversion Kit
Double adjuster set conversion kit with small abutment pin as standard, please select the type required for large or standard (small) type abutment pin.
Set comprises:
- Plain adjuster (23) - 5" long
- 2-off reduced hex nuts (25)
- Abutment pin (26, 27, 28) - standard (small) type or large as chosen.
Select options
This product has multiple variants. The options may be chosen on the product page
Number Plate Post
Norton, Front Wheels and Forks, Triumph, Triumph Centre Section and Cycle Parts, Triumph Front Wheel and Forks, General Components, Accessory Screws
Slickshift Midway Clutch Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us.
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type with the midway angled cable abutment, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Select options
This product has multiple variants. The options may be chosen on the product page
Slickshift Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Select options
This product has multiple variants. The options may be chosen on the product page
T140 Foot Rest Bolt Set
T140 Short Tank Centre Bolt
T140 Triumph Tank Mounting Bolt
Suitable for all Triumph 650 OIF "Oil in Frame" twins, Bonneville, T120R, Tiger, TR6, TR6RV, Trophy, etc from 1971-1972 fitted with the centre locking rib on the down tube frame.
Additionally the bolt is also suitable for BSA A65 Twins (Lightning, Thunderbolt & Firebird Scrambler) from 1971-1972.
Measure 3.760" UH