Conical Hub Front Spindle 8.25″
Early Triumph Front Spindle Set – 7-1/4″
Suitable for early Triumph rigid frame and sprung hub models. Used on single sided hubs 500 & 650cc.
Set comprises front spindle (w578) 7-1/4" overall, spindle washer (w545) and nut (w544).
Select options
This product has multiple variants. The options may be chosen on the product page
Extended Triumph and BSA Conical Hub Brake Lever arm Kit
Fitted to many models of BSA and Triumph twins & triples, this complete extended brake arm set suits models with the 8" TLS front conical hubs, and are designed to give better leverage for better braking experience.
These have been extended to provide an additional 50% in braking effort.
Our kit is fully complete with a pair of (37-3986 right 37-3987 left) brake lever arms, polished or brushed finish. 2-off trunnions (37-0011), cable stop and return spring (37-4014) all in stainless.
Choose your preferred finish, polished or brushed.
Select options
This product has multiple variants. The options may be chosen on the product page
Handlebar Spring Wiring Clip
BSA, BSA Front Wheel and Forks, Norton, Front Wheels and Forks, Triumph, Triumph Front Wheel and Forks
Number Plate Post
General Components, Accessory Screws, Norton, Front Wheels and Forks, Triumph, Triumph Centre Section and Cycle Parts, Triumph Front Wheel and Forks
Polished Conical Hub Nut
T140 Front Disc Hub Bolt Set
Suitable bolt set for the T140 3-piece front disc hub (not Leicester wheel), 1976-1985. Comprises of 4-off 3/8" UNF hex head bolts complete with washers (4-off) and locking nuts (4-off).
Have you seen the broader range of T140 components available ? if no, take a look.
Triumph 2LS Front Brake Arm Spring – Straight Arms Only
Triumph twin leading shoe (2LS) front brake arm return spring for unit construction twins, 1968.
Suitable for models with twin leading shoe, 1968-only straight arms (1969 changes to W3522). This has a straight spring arm with hook, not to be confused with the model for the later twin leading shoe (TLS) which is cranked with a hook.
Triumph 2LS Front Spindle Set 7-1/2″
Suitable for many Triumph Twin Leading Shoe (2LS) models 1968-70.
Complete set comprises of front spindle (w3582), 7-2/5" overall, and spindle nut (s1995).
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph 650 Early Unit Fork Top Nut
Triumph and BSA Fork Oil Drain Screws
Bolts, BA Bolts, Nuts and Bolts, BSA, BSA Front Wheel and Forks, Triumph, Triumph Front Wheel and Forks
2BA Triumph fork drain screws (2-off). These will be suitable for many different models.
Select the head type required.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4
H2290, 3/8"-UNF Triumph / BSA lower pinch bolts (2-off), 2-1/4" U.H.
Suitable for most pre-OIF (Oil In Frame) models, 1968-70.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Lower Yoke Pinch Bolts 2-1/4 Cycle
H941, 3/8"-CEI (Cycle) polished dome Triumph lower pinch bolts (2-off), 2-1/4" U.H.
Suitable for pre-unit and unit construction 650's, up 1968.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph and BSA Lower Yoke Pinch Bolts 2-3/4
14-0238, 3/8"-UNF Triumph /BSA lower pinch bolts (2-off), 2-3/4" U.H.
Suitable for most OIF (Oil In Frame) models, 1971 onwards.
Select options
This product has multiple variants. The options may be chosen on the product page
