Orders placed after Thursday 24th Sept will not be posted until the 6th October
Norton Primary Gearbox Double Adjuster Assembly
Slickshift Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Triumph Pre-Unit Gearbox Adjuster Set
Triumph pre-unit construction single sided plain adjuster set, this is a common adjuster set, however please select the type required should you need longer stud needed for alloy (thicker) plates.
Set comprises:
- Stud (item 19)
- Long stud nut (22) - Note: shown short in diagram.
- Short stud nut (20) LHS
- Serrated washer (21) - Note: Serrations face engine plate outer surface.
- Plain adjuster (23) - 5" long
- 2-off reduced hex nuts (25)
- Abutment pin (26, 27, 28) - small type or large as chosen.