BSA A7 & A10 Front Spindle Ariel Full Width Hub - Image 1
BSA A7 & A10 Front Spindle (full width)
BSA A7 & A10 Front Spindle (full width) £41.80
Back to products
BSA A7 & A10 Front Spindle Nut Ariel Hub
BSA A7 & A10 Front Spindle Nut Ariel Hub £8.50
BSA

BSA A7 & A10 Front Spindle Ariel Full Width Hub

£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950’s with Ariel type full width hubs.

6 in stock

Compare
Add to wishlist
SKU: 42-5590 Categories: , Tags: ,
Description

This spindle is for the A7 & A10 bikes that were produced in the late 1950’s with Ariel type full width hubs.

You may also like…

Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Compare

BSA A7 / A10 Ariel Type Rear Hub Spindle Kit

,
£137.00

Complete rear spindle kit suitable for BSA A7 / A10 models fitted with Ariel type hubs, in and around 1958 (for 1  year only).

Set comprises of: Ariel hub main spindle (42-6071), Ariel fixed spindle (42-6076), slip collar (42-6075), thick washer spindle side (42-6074), thick washer nut side (42-6078), rear spindle nut (42-6077) thread size 11/16"-20, and 4-off sprocket nut (42-6095), thread size 7/16-BSF.

Add to wishlist

    Related products

    Compare

    A65 Fork Top Nut Set

    ,
    £36.00

    These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

    Add to wishlist
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Compare

    Front Brake Fulcrum For 190mm Front Hub BSA

    ,
    £20.65

    For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Sold out
    Compare

    Front Brake Fulcrum For A7 & A10 BSA

    ,
    £18.50

    For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Compare

    Handlebar Clamp Screw – Long BSA

    ,
    £3.60

    These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

    Add to wishlist
    Compare

    Steering Bearing Cover: BSA “A “& “B” Series Models

    ,
    £8.50

    This cover washer is fitted under the top yoke, to cover the bearing.

    Add to wishlist
    Compare

    Steering Stem Sleeve Cap: BSA & Ariel: No Damper

    ,
    £15.00

    This cap is fitted on a few models where there is no need for a central hole, when no steering damper is fitted.  Otherwise, it is identical to the part fitted to later A10 and Gold Star.

    Add to wishlist