BSA Gold Star Front Brake Stay - Image 1
Click to enlarge
Black square stainless classics coming soon image.
Triumph Iron Head Pre-Unit Banjo Bolt Set £26.00
Back to products
Triumph Seat Catch Plunger Knob
Triumph Seat Catch Plunger Knob £22.50
BSA

BSA Gold Star Front Brake Stay

£26.00

BSA Gold Star front brake torque stay.  This is used on the 190mm front brake, and the 8” Single-sided 8” front brake fitted to many other models.

55 in stock

Compare
Add to wishlist
SKU: 67-5578 Categories: , Tags: , ,
Description

BSA Gold Star front brake torque stay.  This is used on the 190mm front brake, and the 8” Single-sided 8” front brake fitted to many other models.

Related products

Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Add to basket
Quick view
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Add to basket
Quick view
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Knob Securing Plate-BSA

,
£15.00

This secures the adjuster knob in place after adjustment.

Add to wishlist
Add to basket
Quick view