BSA Goldstar Engine Mount Spacer Set - Image 1
BSA Goldstar Engine Mount Spacer Set - Image 2
Click to enlarge
BSA Goldstar Engine Mount Spacer Set
BSA Goldstar Engine Mount Spacer Set - Image 2
BSA A7 / A10 Badge Tank Screw Set
BSA A7 / A10 Badge Tank Screw Set £14.00
Back to products
BSA A7 / A10 Engine Sleeve Nut
BSA A7 / A10 Engine Sleeve Nut £6.00
BSA

BSA Goldstar Engine Mount Spacer Set

£7.60

Set (2-off) BSA Goldstar engine mounting spacers (or distance piece).  Suitable for pre-unit swingarm models such as the A7, A10, B31, and B33.  Please check dimensions.

Length – 1/2″, OD – 5/8″, ID – 3/8″

Available on back-order

Compare
Add to wishlist
SKU: 42-4071 Categories: , Tag:
Description

Set (2-off) BSA Goldstar engine mounting spacers (or distance piece).  Suitable for pre-unit swingarm models such as the A7, A10, B31, and B33.  Please check dimensions.

Length – 1/2″, OD – 5/8″, ID – 3/8″

Related products

Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

BSA Lower Yoke Bolts

,
Price range: £7.20 through £15.70

Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135.

Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.

Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view