Front Brake Fulcrum For 7 & 8" (Single Sided) Front Hub BSA (No Adj.) - Image 1
Click to enlarge
Front Brake Fulcrum For 7 & 8" (Single Sided) Front Hub BSA
Front Brake Fulcrum For 7 & 8" (Single Sided) Front Hub BSA £18.50
Back to products
Front Brake Fulcrum For A7 & A10 BSA
Front Brake Fulcrum For A7 & A10 BSA £18.50

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

£18.50

For 7 & 8″ Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

14 in stock

Compare
Add to wishlist
SKU: 67-5576S Categories: , Tags: ,
Description

For 7 & 8″ Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Related products

Compare

A65 Fork Top Nut Set

,
£29.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Star Washer: BSA “A” & “B” Series Models

,
£9.50

This star washer is part of the steering damper assembly, fitted under the lower steering yoke.

Add to wishlist
Add to basket
Quick view