Hot
BSA Golt Star A10 Carburettor Stud Set - Image 1
Click to enlarge
BSA Kneepad Tank Screws Set
BSA Kneepad Tank Screws Set £15.50
Back to products
BSA Toolbox Knob
BSA Toolbox Knob £13.50
BSA

BSA Golt Star A10 Carburettor Stud Set

£7.00

Set (2-off) BSA Gold Star / A10 carburettor studs.

5/16″-WHIT/CEI

15 in stock (can be backordered)

Compare
Add to wishlist
SKU: 37-0347 Categories: , , , , , Tags: , ,
Description

Set (2-off) BSA Gold Star / A10 carburettor studs.

5/16″-WHIT/CEI

Related products

Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

Crinkle Rear Hub Cover: BSA Gold Star

,
£28.00

Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist
Add to basket
Quick view