BSA Plunger Rear Hub Spindle Nut - Image 1
BSA Plunger Rear Hub Spindle Nut - Image 2
BSA Plunger Rear Hub Spindle Nut - Image 3
BSA Plunger Rear Hub Spindle Nut - Image 4
Click to enlarge
BSA Plunger Rear Hub Spindle Nut
BSA Plunger Rear Hub Spindle Nut - Image 2
BSA Plunger Rear Hub Spindle Nut - Image 3
BSA Plunger Rear Hub Spindle Nut - Image 4
5/16 BSF x 2-1/2" Hex Bolt
5/16 BSF x 2-1/2" Hex Bolt £3.85
Back to products
Triumph Swingarm Spindle Kit 1970
Triumph Swingarm Spindle Kit 1970 Price range: £8.50 through £33.50
BSA

BSA Plunger Rear Hub Spindle Nut

£9.50

Rear hub spindle nut suitable for plunger model.

5 in stock

Add to compare
Add to wishlist
SKU: 67-6073 Categories: , Tags: ,
Description

Rear hub spindle nut suitable for plunger model.

Additional information
Weight 0.06 kg
Brand

BSA
Finish

Polished
Fits

BSA A7/A10

,

BSA B31/B33

,

BSA Gold Star
Makes

Stainless Classics

Related products

Add to compare

A10 Gold Star Fork Top Nut

,
£14.50
These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50
This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs. 3/4"-20TPI
Add to wishlist
Add to basket
Quick view
Add to compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00
This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00
A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Lower Yoke Bolts

,
Price range: £7.20 through £15.70
Supplied as a set of 2.  These clamp the lower yoke to the fork stanchions. The bolts have the correct domed and polished head and is the same as 27-5135. Select type of bolts, plain (no nuts or washers), with domed nuts, or plain single chamfer nuts.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Add to compare

Fork Seal Holders BSA

,
£95.00
These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.
Add to wishlist
Add to basket
Quick view
Add to compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80
The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.
Add to wishlist
Add to basket
Quick view
Add to compare

Steering Damper Knob Securing Plate-BSA

,
£15.00
This secures the adjuster knob in place after adjustment.
Add to wishlist
Add to basket
Quick view