BSA Rear Cylinder Head Washers - Image 1
BSA Rear Cylinder Head Washers - Image 2
Click to enlarge
BSA Rear Cylinder Head Washers
BSA Rear Cylinder Head Washers - Image 2
BSA Gold Star Breather Pipe
BSA Gold Star Breather Pipe £9.80
Back to products
BSA Gold Star Tappet Cover Screw Set
BSA Gold Star Tappet Cover Screw Set £12.00
BSA

BSA Rear Cylinder Head Washers

£4.80

BSA Gold Star timing cover breather pipe / banjo.

25 in stock

Compare
Add to wishlist
SKU: 29-7796 Categories: , , , , Tags: ,
Description

Pair (2-off) of BSA rear cylinder head washers, thick with large I.D for sleeve nuts.

You may also like…

Compare

Cylinder Head Rear Shouldered Nut & Thick Washer Set: BSA A7 & A10

,
£12.40

These sleeve nuts and washers connect the rear rocker box to the cylinder head.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    A10 Gold Star Fork Top Nut

    ,
    £14.50

    These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    A65 Fork Top Nut Set

    ,
    £29.00

    These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle Ariel Full Width Hub

    ,
    £34.00

    This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamp Spacer

    ,
    £4.80

    These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00

    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Crinkle Rear Hub Cover: BSA Gold Star

    ,
    £28.00

    Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

    Add to wishlist
    Add to basket
    Quick view