BSA Rocker Box Stud Set - Image 1
BSA Rocker Box Stud Set - Image 2
BSA Rocker Box Stud Set
BSA Rocker Box Stud Set - Image 2
BSA Gold Star Tappet Cover Screw Set
BSA Gold Star Tappet Cover Screw Set £12.00
Back to products
Norton Commando Primary Gearbox Double Adjuster Assembly
Norton Commando Primary Gearbox Double Adjuster Assembly £54.00
BSA

BSA Rocker Box Stud Set

£7.00

Pair (2-off) of BSA A7 / A10 rocker box studs.  Two options provided, long (2″) and short (1-11/16″).

Note: Both types shown in image for comparison, only 2 supplied.

Compare
Add to wishlist
SKU: 67-1117 Categories: , , , Tags: ,
Description

Pair (2-off) of BSA A7 / A10 rocker box studs.  Two options provided, long (2″) and short (1-11/16″).

Note: Both types shown in image for comparison, only 2 supplied.

You may also like…

Sold out
Compare

Cylinder Head Rear Shouldered Nut & Thick Washer Set: BSA A7 & A10

,
£12.40

These sleeve nuts and washers connect the rear rocker box to the cylinder head.

Add to wishlist

    Related products

    Compare

    A65 Fork Top Nut Set

    ,
    £36.00

    These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

    Add to wishlist
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Compare

    BSA Top Yoke Extended Nut

    ,
    £5.50

    This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

    Add to wishlist
    Compare

    Crinkle Rear Hub Cover: BSA Gold Star

    ,
    £28.00

    Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

    Add to wishlist
    Sold out
    Compare

    Front Brake Fulcrum For A7 & A10 BSA

    ,
    £18.50

    For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Compare

    Steering Damper Knob Securing Plate-BSA

    ,
    £15.00

    This secures the adjuster knob in place after adjustment.

    Add to wishlist