BSA Rocker Oil Feed Bolt 2.4mm - Image 1
BSA Rocker Oil Feed Bolt 2.4mm - Image 2
BSA Rocker Oil Feed Bolt 2.4mm - Image 3
Click to enlarge
BSA Rocker Oil Feed Bolt 2.4mm
BSA Rocker Oil Feed Bolt 2.4mm - Image 2
BSA Rocker Oil Feed Bolt 2.4mm - Image 3
BSA Rocker Oil Feed Bolt 1.25mm
BSA Rocker Oil Feed Bolt 1.25mm £4.80
Back to products
BSA breather pipe 3mm
BSA breather pipe 3mm £4.80
BSA

BSA Rocker Oil Feed Bolt 2.4mm

£4.80

BSA rocker spindle oil feed banjo bolt suitable for Gold Star, A7 and A10.

Hole is 2.4mm.

17 in stock

Compare
Add to wishlist
SKU: 65-0318 Categories: , Tags: ,
Description

BSA rocker spindle oil feed banjo bolt suitable for Gold Star, A7 and A10.

Hole is 2.4mm.

You may also like…

Compare

BSA Rocker Oil Feed Bolt 1.25mm

,
£4.80

BSA rocker spindle oil feed banjo bolt suitable for Gold Star, A7 and A10.

Hole is 1.25mm which can be opened up with a suitable drill bit.

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    BSA A7 & A10 Front Spindle Nut Ariel Hub

    ,
    £8.50

    This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

    3/4"-20TPI

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00

    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Crinkle Rear Hub Cover: BSA Gold Star

    ,
    £28.00

    Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Fork Seal Holders BSA

    ,
    £95.00

    These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 190mm Front Hub BSA

    ,
    £20.65

    For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Handlebar Clamp Screw – Long BSA

    ,
    £3.60

    These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Backing Plate: BSA “A” & “B” Series Models

    ,
    £7.80

    The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

    Add to wishlist
    Add to basket
    Quick view