Carburettor Drip Tray: BSA A7 & A10 (Manual Advance) - Image 1
Click to enlarge
Cast Sump Plate Stud Kit: BSA A7 & A10
Cast Sump Plate Stud Kit: BSA A7 & A10 £11.20
Back to products
Cylinder Head Rear Shouldered Nut & Thick Washer Set: BSA A7 & A10
Cylinder Head Rear Shouldered Nut & Thick Washer Set: BSA A7 & A10 £12.40

Carburettor Drip Tray: BSA A7 & A10 (Manual Advance)

£18.50

This tray is designed to duct any leaked fuel away from the magneto points, where it could be ignited. To clear the magneto contacts and its cable, it is shaped off-centre. the central hole is made a clearance diameter on 1-1/8″, for the TT- carburettor.

6 in stock

Compare
Add to wishlist
SKU: DRIPT-M Categories: , Tags: , , ,
Description

This tray is designed to duct any leaked fuel away from the magneto points, where it could be ignited. To clear the magneto contacts and its cable, it is shaped off-centre. the central hole is made a clearance diameter on 1-1/8″, for the TT- carburettor.

Related products

Compare

BSA A7 & A10 Front Spindle (full width)

,
£41.80

This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Sold out
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Read more
Quick view
Compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50

This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Add to basket
Quick view