Centre Stand Spring: BSA Gold Star, A10 and B31 - Image 1
Centre Stand Spring: BSA Gold Star, A10 and B31 - Image 2
Centre Stand Spring: BSA Gold Star, A10 and B31 - Image 3
Centre Stand Spring: BSA Gold Star, A10 and B31
Centre Stand Spring: BSA Gold Star, A10 and B31 - Image 2
Centre Stand Spring: BSA Gold Star, A10 and B31 - Image 3
Black square stainless classics coming soon image.
Triumph T140 Outer Cylinder Socket Nuts £32.00
Back to products
Triumph and BSA Kickstart Cotter Pin
Triumph and BSA Kickstart Cotter Pin Price range: £8.00 through £9.25

Centre Stand Spring: BSA Gold Star, A10 and B31

£6.80

BSA centre stand spring suitable for BSA A and B swingarm models from 1954-62.  Suitable for swinging arm models – BSA Goldstar, B31, B32, B33, B34 from 1954-63 + A7, A10 from 1954 onwards.

189 in stock

Compare
Add to wishlist
SKU: 42-4730 Categories: , , Tags: , , ,
Description

BSA centre stand spring suitable for BSA A and B swingarm models from 1954-62.  Suitable for swinging arm models – BSA Goldstar, B31, B32, B33, B34 from 1954-63 + A7, A10 from 1954 onwards.

Related products

Compare

BSA A7 & A10 Front Spindle Nut

,
£6.50

This nut is for the later A7 & A10 with the 8" full width hub.

Add to wishlist
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Compare

Steering Damper Knob Securing Plate-BSA

,
£15.00

This secures the adjuster knob in place after adjustment.

Add to wishlist