Triumph and BSA Kickstart Cotter Pin - Image 1
Triumph and BSA Kickstart Cotter Pin - Image 2
Triumph and BSA Kickstart Cotter Pin - Image 3
Triumph and BSA Kickstart Cotter Pin - Image 4
Triumph and BSA Kickstart Cotter Pin - Image 5
Triumph and BSA Kickstart Cotter Pin
Triumph and BSA Kickstart Cotter Pin - Image 2
Triumph and BSA Kickstart Cotter Pin - Image 3
Triumph and BSA Kickstart Cotter Pin - Image 4
Triumph and BSA Kickstart Cotter Pin - Image 5
Centre Stand Spring: BSA Gold Star, A10 and B31
Centre Stand Spring: BSA Gold Star, A10 and B31 £6.80
Back to products
BSA C15 B40 Cylinder Head Stud Set
BSA C15 B40 Cylinder Head Stud Set £46.00
BSA Triumph

Triumph and BSA Kickstart Cotter Pin

Price range: £8.00 through £9.25

Milled Triumph and BSA cotter pin (1-off) complete with machined washer and plain nut.  Suitable for a large number of models including the OIF T120, T140, T150 and T160 triples.

Compare
Add to wishlist
SKU: 57-4356 Categories: , , , Tag:
Description

Milled Triumph and BSA cotter pin (1-off) complete with machined washer and plain nut.  Suitable for a large number of models including the OIF T120, T140, T150 and T160 triples.

Two length can be provided, select the option required.

Related products

Compare

BSA A7 & A10 Front Spindle Nut

,
£6.50

This nut is for the later A7 & A10 with the 8" full width hub.

Add to wishlist
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Sold out
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist