Cylinder Barrel Dome Nut Set for BSA Gold Star - Image 1
Cylinder Barrel Dome Nut Set for BSA Gold Star - Image 2
Cylinder Barrel Dome Nut Set for BSA Gold Star - Image 3
Click to enlarge
Cylinder Barrel Dome Nut Set for BSA Gold Star
Cylinder Barrel Dome Nut Set for BSA Gold Star - Image 2
Cylinder Barrel Dome Nut Set for BSA Gold Star - Image 3
Rocker Feed Dome Nut Set for BSA Gold Star
Rocker Feed Dome Nut Set for BSA Gold Star £15.00
Back to products
Eddie Dow “Duetto” Front Brake Linkage
Eddie Dow “Duetto” Front Brake Linkage £32.00

Cylinder Barrel Dome Nut Set for BSA Gold Star

£9.60

Cylinder barrel dome nuts (2-off).

1/4″-26 thread.

Available on back-order

Compare
Add to wishlist
SKU: 65-930 Categories: , , , ,
Description

Cylinder barrel dome nuts (2-off).

1/4″-26 thread.

You may also like…

Compare

Rocker Feed Dome Nut Set for BSA A7 and A10

,
£9.20

These dome nuts (2-off) finish off the rocker spindle ends very nicely (3/8"-26 thread)

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    A65 Rear Sprocket Bolt Set

    ,
    £26.00

    Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Fork Seal Holders BSA

    ,
    £95.00

    These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Lever, 8″ Full Width Hub, A7 & A10

    ,
    £12.50

    This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Centre: BSA “A” & “B” Series Models

    ,
    £8.50

    This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Steering Damper Knob Securing Plate-BSA

    ,
    £15.00

    This secures the adjuster knob in place after adjustment.

    Add to wishlist
    Add to basket
    Quick view