Cylinder Head Rear Shouldered Nut & Thick Washer Set: BSA A7 & A10 - Image 1
Click to enlarge
Carburettor Drip Tray: BSA A7 & A10 (Manual Advance)
Carburettor Drip Tray: BSA A7 & A10 (Manual Advance) £18.50
Back to products
Carburettor Drip Tray: BSA A7 & A10 (Auto Advance)
Carburettor Drip Tray: BSA A7 & A10 (Auto Advance) £18.50

Cylinder Head Rear Shouldered Nut & Thick Washer Set: BSA A7 & A10

£12.40

These sleeve nuts and washers connect the rear rocker box to the cylinder head.

19 in stock

Add to compare
Add to wishlist
SKU: 67-1118SET Categories: , Tags: ,
Description

These sleeve nuts and washers connect the rear rocker box to the cylinder head.

Additional information
Weight 0.03 kg
Dimensions 2 × 0.2 × 0.5 in
Finish

Polished
Fits

BSA A7/A10
Makes

Stainless Classics

Related products

Add to compare

A65 Fork Top Nut Set

,
£29.00
These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA A7 & A10 Front Spindle (full width)

,
£32.00
This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00
This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Handlebar Clamp Spacer

,
£4.80
These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00
A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.
Add to wishlist
Add to basket
Quick view
Add to compare

BSA Top Yoke Extended Nut

,
£5.50
This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.
Add to wishlist
Add to basket
Quick view
Add to compare

Front Brake Lever, 7 & 8″ Single Sided & 190mm Hubs

,
£13.50
This brake lever is used on the Gold Stars and many other BSA's of the 50's & early 60's.
Add to wishlist
Add to basket
Quick view
Add to compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80
The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.
Add to wishlist
Add to basket
Quick view