Norton Featherbed Rear Brake Spindle Set
£97.00
Norton rear brake spindle set suitable for Featherbed models (20-TPI).
Set includes, 1-off rear spindle, “dummy’ short spindle, spindle nut, RH spacer, LH brake side spacer, and washers (2-off),
Select the length of main spindle required, short is 2-5/8″ long.
Rear chain adjuster and nuts (2-off) 1/4″-26TPI available individually.
Description
Norton rear brake spindle set suitable for Featherbed models (20-TPI).
Set includes, 1-off rear spindle, “dummy’ short spindle, spindle nut, RH spacer, LH brake side spacer, and washers (2-off),
Select the length of main spindle required, short is 2-5/8″ long.
Rear chain adjuster and nuts (2-off) 1/4″-26TPI available individually.
Additional information
| Weight | 0.6 kg |
|---|---|
| Brand |
Norton |
| Finish |
Machine ,Polished |
| Makes |
Stainless Classics |
| Select Typpe |
Long Spindle ,Short Spindle |
You may also like…
Related products
Norton Front Wheel Spindle ‘Round’ Type
Front wheel spindle 'round' type with 'tommy' bar hole.
Fitment:
- 7" wide yokes, 9/16-20 TPI = Pre-1964 narrow type forks (Dominator, ES2, etc ...) (20249)
- 7-3/8" wide yokes 9/16-20 TPI = Later Dominators 1964 onwards and AMC Hybrids (03-0055)
- 7-3/8" wide yokes 9/16-18 TPI = Commando and some very late Dominators
Silencer Clamp 1-3/4″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters
Silencer Clamp 1-5/8″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
