We are at the next Kempton autojumble - September 19th 2026
BSA A50 / A65 1962-71 Rear Spindle Set 9/16-20″
BSA introduced many detailed changes to spindles and their associated parts during the short period between 1962-71, with only some of them affecting their interchangeability. To serve the restoration process better and provide a practical answer that copes with most of these variations, Stainless Classics provides two kit types. The most important difference is that the thread on the main spindle was either 9/16”-20 CEI (cycle) this product, or an 11/16”-20 CEI option, covering both “fixed spindle” thread forms.
Before ordering, make sure which thread you require. If you do not have to bring together old and new threads, you are free to choose either kit type, in which case, it would be sensible to select 11/16”-20, as this seems to be the later option. (The thread at the outer end (LHS) is always 9/16-20 CEI.)
Select the type required, with or without adjusters.
Select options
This product has multiple variants. The options may be chosen on the product page
BSA A7 & A10 Rear Spindle Set
This rear spindle set is for the later A7 and A10 with 8" full width hub. It comprises the main spindle, "dummy spindle", spindle nut (LHS), spacer, and both washers.
USEFUL INFORMATION
There two other spindle sets which were fitted to A10’s / A7’s, depending upon when they left the factory, please check before ordering.
- Some mid 1950’s models had the same set up as the B31 and Gold star DB 32 and DB34. (See Gold Star Rear)
- Around 1958, BSA used up some excess Ariel alloy hubs (front and rear) and these models had spindles modelled on the Ariel ones, but were shorter. You can find these by searching for “ BSA Ariel, front or rear”
BSA A7 / A10 Ariel Type Rear Hub Spindle Kit
Complete rear spindle kit suitable for BSA A7 / A10 models fitted with Ariel type hubs, in and around 1958 (for 1 year only).
Set comprises of: Ariel hub main spindle (42-6071), Ariel fixed spindle (42-6076), slip collar (42-6075), thick washer spindle side (42-6074), thick washer nut side (42-6078), rear spindle nut (42-6077) thread size 11/16"-20, and 4-off sprocket nut (42-6095), thread size 7/16-BSF.
BSA Triumph Rear Spindle Set 1970 onwards
Spindle (w3774) set (Nyloc spindle nut - 14-1307, Washer F12266) suitable for BSA's and some Triumphs 1970 onwards, including B25, B44, B50 etc ..
We provided spindle complete rear spindle sets or just rear spindles only, please select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
BSA up to 1970 Rear Spindle Kit
Complete rear spindle kit suitable for BSA B44, B25, and B40 models up to 1970. Note 71 model spindles and accessories also available.
Set comprises of: Rear spindle (41-6098), fixed spindle (41-6032), fixed spindle nut (68-6066), spacer, inner speedo drive side (41-6019), outer spacer (41-6082). Optionally with rear chain adjusters.
Select the type required, with or without adjusters.
Select options
This product has multiple variants. The options may be chosen on the product page
Early Triumph Front Spindle Set – 7-1/4″
Suitable for early Triumph rigid frame and sprung hub models. Used on single sided hubs 500 & 650cc.
Set comprises front spindle (w578) 7-1/4" overall, spindle washer (w545) and nut (w544).
Select options
This product has multiple variants. The options may be chosen on the product page
Early Triumph Rear Spindle Set – 10-1/8″
Late Triumph Rear Spindle Set 1970 onwards
9-3/4" UH spindle (W3695) set (Nyloc spindle nut - 14-1307, Washer F12266) and Chain Adjusters suitable for late Triumphs T120's 1970 onwards.
We provided spindle complete rear spindle sets or rear spindle sets without adjusters, please select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
Norton Featherbed Rear Brake Spindle Set
Norton rear brake spindle set suitable for Featherbed models (20-TPI).
Set includes, 1-off rear spindle, "dummy' short spindle, spindle nut, RH spacer, LH brake side spacer, and washers (2-off),
Select the length of main spindle required, short is 2-5/8" long.
Rear chain adjuster and nuts (2-off) 1/4"-26TPI available individually.
Select options
This product has multiple variants. The options may be chosen on the product page
T150 Triumph Rear Spindle Set
9-3/4" UH spindle (W3980, 37-3980) set (Nyloc spindle nut - 14-1307, Washer W3976) and Chain Adjusters suitable for T150 / Trident Triumphs 1971 onwards. Does not include W3901 distance piece.
Select the type you require.
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
Triumph 2LS Front Spindle Set 7-1/2″
Suitable for many Triumph Twin Leading Shoe (2LS) models 1968-70.
Complete set comprises of front spindle (w3582), 7-2/5" overall, and spindle nut (s1995).
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
Triumph Conical Hub Front Spindle Set 8-1/4″
Conical hub front spindle as fitted to many Triumph unit construction models 1971 onwards.
Complete set comprises of front spindle (w3796), 8-1/4" overall, and spindle nut (w2058).
Select options
This product has multiple variants. The options may be chosen on the product page