Rear Brake Fulcrum Pin: BSA Gold Star, A10 - Image 1
Click to enlarge
Rear Brake Outrigger Strap: BSA Gold Star, A10
Rear Brake Outrigger Strap: BSA Gold Star, A10 £12.00
Back to products
Rear Spindle BSA A65 & A50 Models: 9/16" thread size
Rear Spindle BSA A65 & A50 Models: 9/16" thread size £40.00

Rear Brake Fulcrum Pin: BSA Gold Star, A10

£18.00

Rear brake fulcrum pin for Gold Star, B31/33, RGS and some A7 and A10 models.(including nut & washer).

8 in stock

Compare
Add to wishlist
SKU: 42-6033 Categories: , Tags: , ,
Description

Rear brake fulcrum pin for Gold Star, B31/33, RGS and some A7 and A10 models.(including nut & washer).

Related products

Compare

A65 Rear Sprocket Bolt Set

,
£26.00

Reduced head bolts (10-off) for mid to late 1960's A50 & A65 sprocket fixing. Thread size: 5/16"-UNF.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Nut Ariel Hub

,
£8.50

This front spindle nut is for the A7 & A10 bikes that were produced circa 1958 with Ariel type full width hubs.

3/4"-20TPI

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Add to basket
Quick view
Compare

Crinkle Rear Hub Cover: BSA Gold Star

,
£28.00

Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view