Rear Spindle Nut: A50 & A65 (Large) - Image 1
Click to enlarge
Rear Spindle BSA A65 & A50 Models: 9/16" thread size
Rear Spindle BSA A65 & A50 Models: 9/16" thread size £40.00
Back to products
Rear Spindle Nut: A50 & A65 (Small)
Rear Spindle Nut: A50 & A65 (Small) £8.50

Rear Spindle Nut: A50 & A65 (Large)

£9.00

Rear Spindle Nut for mid to late 1960’s A50 and A65.This is the larger of the two types produced. (Overall diameter: 1-5/16″ : 33mm) Thread size 9/16″.

8 in stock (can be backordered)

Compare
Add to wishlist
SKU: A65NL Categories: , Tags: ,
Description

Rear Spindle Nut for mid to late 1960’s A50 and A65.This is the larger of the two types produced. (Overall diameter: 1-5/16″ : 33mm) Thread size 9/16″.

Related products

Compare

A65 Fork Top Nut Set

,
£29.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For A7 & A10 BSA

,
£18.50

For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw BSA

,
£2.80

These are the normal short clamp screws, used on most models.

Add to wishlist
Add to basket
Quick view