Steering Stem Sleeve Cap: BSA "A "& "B"- Series Models - Image 1
Click to enlarge
Steering Stem Sleeve Cap: BSA & Ariel: No Damper
Steering Stem Sleeve Cap: BSA & Ariel: No Damper £15.00
Back to products
Steering Stem Sleeve Cap: BSA C15, B40 & Other Derivative Models
Steering Stem Sleeve Cap: BSA C15, B40 & Other Derivative Models £14.50

Steering Stem Sleeve Cap: BSA “A “& “B”- Series Models

£15.00

This prominent feature is fitted at the top, middle of the steering column.

Be careful, there are several smaller types that are fitted on earlier or smaller models.

52 in stock (can be backordered)

Compare
Add to wishlist
SKU: 67-5024 Categories: , Tags: ,
Description

This prominent feature is fitted at the top, middle of the steering column.

Be careful, there are several smaller types that are fitted on earlier or smaller models.

Related products

Compare

A10 Gold Star Fork Top Nut

,
£14.50

These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

Add to wishlist
Add to basket
Quick view
Compare

A65 Fork Top Nut Set

,
£29.00

These are nearly identical to the 65-5331 type, except that they are tapped 5/16"-26 for the fitting of damper rods for double damping. This means that they will actually fit a very wide variety of different BSA models.  Sold as 2-off.

Add to wishlist
Add to basket
Quick view
Compare

BSA A7 & A10 Front Spindle Ariel Full Width Hub

,
£34.00

This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs.

Add to wishlist
Add to basket
Quick view
Compare

BSA Handlebar Clamps for BSA “A ” and “B” Models

,
£34.00

A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

Add to wishlist
Add to basket
Quick view
Compare

BSA Top Yoke Extended Nut

,
£5.50

This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

Add to wishlist
Add to basket
Quick view
Compare

Crinkle Rear Hub Cover: BSA Gold Star

,
£28.00

Hub cover, for the Gold Star, B31, RGS and some A7 and A10 models with the "Crinkle Hub".

Add to wishlist
Add to basket
Quick view
Compare

Front Hub Spindle, Single Sided Hub BSA

,
£32.00

This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Add to basket
Quick view