Recent Products
BSA - NORTON - TRIUMPH
NEW & RECENT PRODUCTS
Great new products added recently. Check back frequently as products are added weekly.
Late Norton Dominator Brake Rod Assembly
Complete brake rod assembly for Norton "88 & "99" Dominators, 500SS, and 650SS, also Atlas and Mercury models. It is also correct for the Featherbed framed Singles, ES2 and Model 50. It comes with the "flag" that operates the original type of stop-lamp switch, but this can be rotated to fix it in the ideal position for the switch.
Silencer Clamp 1-1/2″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
Winged Brake Adjuster
This brake rod adjuster is suitable for early Norton Singles, and the Lightweight range such as Jubilee and Navigator from the 1960?s, and indeed for
the AMC two-stroke models (Francis Barnet and James) from the 1950?s and early 1960?s. This kind of adjuster was common on other makes, as well. Made on new tooling.
Thread size: 1/4?- BSF Length: 1.14? (29mm)
Width Over Wings: 1-3/8? (35mm)
Norton Battery Box Screw
Triumph Unit Construction Brake Rod Assembly (1/4″-26 thread)
Complete brake rod assembly for the 1962 to 1968 650cc models, and 350-500cc unit construction models, from 1959-68. The rod length is 21″, and it has the 90 degrees cranked end, connecting with the brake pedal. The adjuster is made to the Triumph pattern of the period, having a bullet-shape with a 1/4″-26 thread.
Triumph Unit Construction Brake Rod Assembly (1/4″-28 UNF thread)
Complete brake rod assembly for the 1968 to the early `70`s models, and 350-500cc unit construction models, from 1968. The rod length is 21", and it has the 90 degrees cranked end, connecting with the brake pedal. The adjuster is made to the Triumph pattern of the period, having a bullet-shape with a 1/4"-28-UNF thread. This assembly also fits many BSA models from 1968 onwards.
Triumph Pre-Unit Duplex Frame Brake Rod Assembly
Triumph Pre-Unit Swinging Arm Frame Brake Rod Assembly
Triumph Sprung Hub Brake Rod Assembly
Complete brake rod assembly for 5T & 6T Sprung Hub models, and is 20" long O/A. The rod length is 19", and it is fitted with the familiar "tear-drop" shaped clevis. (this has a 1/4"-28) internal thread. The adjuster is made to the Triumph pattern of the period, having a "T"-shape with a 1/4"-26 thread.