BSA Oil Tank Filter Set - Image 1
BSA Oil Tank Filter Set - Image 2
BSA Oil Tank Filter Set - Image 3
BSA Oil Tank Filter Set - Image 4
Click to enlarge
BSA Oil Tank Filter Set
BSA Oil Tank Filter Set - Image 2
BSA Oil Tank Filter Set - Image 3
BSA Oil Tank Filter Set - Image 4
Triumph Steering Stem Centre Nut
Triumph Steering Stem Centre Nut £14.50
Back to products
Rocker Box Bolt Set: BSA A7 & A10
Rocker Box Bolt Set: BSA A7 & A10 £16.00
BSA

BSA Oil Tank Filter Set

£32.00

The oil tank filter itself is made of brass, and is attached to the polished stainless body by means of a 26 tpi thread. This means that it can be separated and thoroughly cleaned during an oil change operation.

37 in stock

Compare
Add to wishlist
SKU: 42-8426 Categories: , Tags: , ,
Description

The oil tank filter itself is made of brass, and is attached to the polished stainless body by means of a 26 tpi thread. This means that it can be separated and thoroughly cleaned during an oil change operation.

Related products

Compare

BSA A7 & A10 Rear Dummy Spindle

,
£35.00

This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

Add to wishlist
Add to basket
Quick view
Compare

BSA and Triumph Fork Top Nut Washers

,
£5.00

These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA (No Adj.)

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is designed for use with a plain cable end, when no cable adjuster is required.

Add to wishlist
Add to basket
Quick view
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Add to basket
Quick view
Compare

Handlebar Clamp Screw – Long BSA

,
£3.60

These are the normal long clamp screws, used on models which incorporate a steering damper.  Two short + two of these longer ones are required.

Add to wishlist
Add to basket
Quick view
Compare

Steering Bearing Cover: BSA “A “& “B” Series Models

,
£8.50

This cover washer is fitted under the top yoke, to cover the bearing.

Add to wishlist
Add to basket
Quick view
Compare

Steering Damper Knob Securing Plate-BSA

,
£15.00

This secures the adjuster knob in place after adjustment.

Add to wishlist
Add to basket
Quick view