We will unfortunately NOT be at the next Kempton autojumble - September 19th 2026
Short Norton Rear Spindle Short Head
Suitable for Nortons with single down tubes, during the 1940's-1950's.
Spindle is 9/16" x 8" UH, 20TPI. This is very similar to the rear spindle used on the Featherbed models, but has a shorter hear style.
Typical models this will suit are, Model 7, 77, 50, ES2 and 18. Note, not for plunger type frames.
Shouldered Brake Trunnion
Side Stand Spring: BSA Gold Star, A7, A10 & RGS
Silencer Clamp 1-1/2″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
Silencer Clamp 1-3/4″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters
Silencer Clamp 1-5/8″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
Hot
Hot
Silencer Spring Hooks
Slickshift Midway Clutch Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us.
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type with the midway angled cable abutment, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Select options
This product has multiple variants. The options may be chosen on the product page