Orders placed after Thursday 24th Sept will not be posted until the 6th October
Spindle Kits
SPINDLE KITS
WHEEL AND SWING ARM
Full and partial spindle kits for Triumph, BSA and Norton front / rear wheels & swing arms. Complete with nuts, spacers, washers and adjusters as fitted to your machine originally.
Note: Stainless Classics has been providing spindles and associated spindle components for many years, you can purchase complete kits or partial kits as needed below. Every component is also available separately if you require it - just search for the part number or name. If you can't find what you need, just get in touch with us via the Contacts page.
Early Triumph Front Spindle Set – 7-1/4″
Suitable for early Triumph rigid frame and sprung hub models. Used on single sided hubs 500 & 650cc.
Set comprises front spindle (w578) 7-1/4" overall, spindle washer (w545) and nut (w544).
Select options
This product has multiple variants. The options may be chosen on the product page
Sold out
BSA A7 & A10 Rear Spindle Set
This rear spindle set is for the later A7 and A10 with 8" full width hub. It comprises the main spindle, "dummy spindle", spindle nut (LHS), spacer, and both washers.
USEFUL INFORMATION
There two other spindle sets which were fitted to A10’s / A7’s, depending upon when they left the factory, please check before ordering.
- Some mid 1950’s models had the same set up as the B31 and Gold star DB 32 and DB34. (See Gold Star Rear)
- Around 1958, BSA used up some excess Ariel alloy hubs (front and rear) and these models had spindles modelled on the Ariel ones, but were shorter. You can find these by searching for “ BSA Ariel, front or rear”
BSA A7 A10 Hollow Swingarm Spindle Set
Late Triumph Rear Spindle Set 1970 onwards
9-3/4" UH spindle (W3695) set (Nyloc spindle nut - 14-1307, Washer F12266) and Chain Adjusters suitable for late Triumphs T120's 1970 onwards.
We provided spindle complete rear spindle sets or rear spindle sets without adjusters, please select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
New
Triumph Swingarm Spindle Retaining Cap Set
Hot
Triumph Conical Hub Front Spindle Set 8-1/4″
Conical hub front spindle as fitted to many Triumph unit construction models 1971 onwards.
Complete set comprises of front spindle (w3796), 8-1/4" overall, and spindle nut (w2058).
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
Triumph Unit Construction Front Spindle Set 7-1/4″
Front spindle as fitted to many Triumph unit construction models 1964-67.
Complete set comprises of front spindle (W1641), 7-1/4" overall, and thin nut (w1246).
Select options
This product has multiple variants. The options may be chosen on the product page
Hot
Triumph Unit and Pre-Unit Construction Front Spindle Set 7-1/16″
Front spindle as fitted to many Triumph unit construction models 1962/63 onwards, and 1954-62 pre-unit full width hub models (swinging arm).
Complete set comprises of front spindle (W1239), 7-1/16" overall, and thin nut (w1246).
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph T140V TR7RV Rear Spindle Set
9-3/4" UH spindle (W3695) set (Nyloc spindle nut - 14-1307, Washer 83-3082) and Chain Adjusters suitable for Triumphs T140V and TR7RV.
We provided spindle complete rear spindle sets or rear spindle sets without adjusters, please select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph QD Rear Spindle Set post 1967
Rear QD spindle set 1967/68 (18 TPI threads only) suitable for:
- Unit construction 650cc
- Unit construction 350 & 500cc
Note: Customers should check their spindle thread carefully before ordering as threads changed to 9/16" 18-TPI UNF around 1967.
A complete set comprises of rear spindle (w1055), spindle nut (W1052), distance pieces, bearing adjuster nuts (E398), spacer (W1037), and a set of rear chain adjusters.
We provide a complete spindle set with and without chain adjusters, please select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
Triumph QD Rear Spindle Set
Pre unit swinging arm spindle set suitable for:
- Pre-unit swinging arm frame 1953-1962 500 & 650cc, and duplex frame 650cc
- 3TA & 5TA and unit construction up to 1967
All spindles have a thread of 9/16" DIA x 20 TPI
A complete set comprises of rear spindle (w1055), spindle nut (W1052), distance pieces (W1170, W1053), bearing adjuster nuts (E398), spacer (W1037), bearing sleeve (W1045) and a set of rear chain adjusters.
We provided a complete spindle set with and without chain adjusters, please select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
BSA Triumph Rear Spindle Set 1970 onwards
Spindle (w3774) set (Nyloc spindle nut - 14-1307, Washer F12266) suitable for BSA's and some Triumphs 1970 onwards, including B25, B44, B50 etc ..
We provided spindle complete rear spindle sets or just rear spindles only, please select the option you require.
Select options
This product has multiple variants. The options may be chosen on the product page
