Showing 745–756 of 861 results

Show sidebar
Show 9 12 18 24
Compare

Triumph Pre-Unit and Duplex Footrest Stud Assembly

,
£12.80

This set comprises the long stud, two nuts and washers, to hold on the footrests, suitable for all swinging arm models from 1954 to 1962 which includes the duplex models.

Overall length is 11-1/4", 20TPI.

Add to wishlist
Black square stainless classics coming soon image.
Compare

Triumph Pre-Unit Banjo Bolt Set

,
£26.00

Set (6-off) polished banjo bolts suitable for T100 / Tr5 pre-unit Triumph engines.

  • 4 x 3/8 BSF - E2767
  • 2 x 5/16 CEI - E984
Add to wishlist
Compare

Triumph Pre-Unit Centre Stand Bolt Set 1/2″

,
£16.00

Triumph main stand / centre (center) stand set, comprising of 2-off bolts (F3619) and slim nuts (F2725).  Suitable Triumph pre-unit 500/650cc models, 1954-1959.

1/2" CEI-20TPI

Add to wishlist
Compare

Triumph pre-Unit Centre Stand Spring

, ,
£6.40

Triumph pre-unit centre stand spring. Suitable for swingarm 650cc models 1954-60, including 350/500cc models.

Add to wishlist
Compare

Triumph Pre-Unit Duplex Frame Brake Rod Assembly

, ,
£36.00

Complete brake rod assembly for the mid to late 1960- 62 models, which had the duplex frame.  The rod length is 21", and it has the 90 degrees cranked end, connecting with the brake pedal. The adjuster is made to the Triumph pattern of the period, having a bullet-shape with a 1/4"-26 thread.

Add to wishlist
Compare

Triumph Pre-Unit Fork Oil Drain Screw Set

,
£6.00

Pair (2-off) fork drain plug with locating peg suitable for 3TA, 5TA, T90, T100  and T120, 1957-1967 era.

Add to wishlist
Compare

Triumph Pre-Unit Fork Stem Centre Nut 26TPI

,
£14.50

Triumph fork stem/centre sleeve nut (26TPI).   Suitable for pre-unit 500 and 650 models, 3TA and 5TA models up to 1956 to 1968.

Add to wishlist
Compare

Triumph Pre-Unit Fork Top Nut

,
£14.50

Fork top nut suitable for Triumph pre-unit models 1946-1959 with the exception of Duplex models.

This nut will fit Trophy and Nacelle models also.

Add to wishlist
Compare

Triumph Pre-Unit Gearbox Adjuster Set

,
Price range: £60.30 through £63.00

Triumph pre-unit construction single sided plain adjuster set, this is a common adjuster set, however please select the type required should you need longer stud needed for alloy (thicker) plates.

Set comprises:

  • Stud (item 19)
  • Long stud nut (22) - Note: shown short in diagram.
  • Short stud nut (20) LHS
  • Serrated washer (21) - Note: Serrations face engine plate outer surface.
  • Plain adjuster (23) - 5" long
  • 2-off reduced hex nuts (25)
  • Abutment pin (26, 27,  28) - small type or large as chosen.
Add to wishlist
This product has multiple variants. The options may be chosen on the product page
Compare

Triumph Pre-Unit Rigid Model Footrest Stud Assembly

,
£13.20

This set comprises the long stud, two nuts and washers, to hold on the footrests, suitable for all rigid models up to 1954 except the 3T.

Overall length is 12-1/4", 20TPI.

Add to wishlist
Placeholder
Compare

Triumph Pre-Unit Side Stand Bolt

,
£4.50

Triumph side stand bolt suitable for various pre-unit models between 1954 - 1968, including the Triumph 5T, 6T, T100, TR5, T110, TR6 Trophy, T120 1954-1966.  Triumph TR25W 1968-70, Triumph TRW and Triumph T20 Tiger Cub 1954-68.

1-3/8" Cycle UH

Add to wishlist
Compare

Triumph Pre-Unit Swinging Arm Frame Brake Rod Assembly

, ,
£32.00

Complete brake rod assembly for the mid to late 1950's models, and is 21" long O/A. The rod length is 21", and it has the 90 degrees cranked, connecting with the brake pedal. The adjuster is made to the Triumph pattern of the period, having a "T"-shape with a 1/4"-26 thread.

Add to wishlist