Norton Brake Rod Only (19-1/2″)
Norton Commando Centre Stem Nut
Norton Commando Roadholder Fork Collars
Set (2-off) of Norton Commando, 1970 onwards fork seal collars.
These collars included a recess above the fork thread to receive the rubber stanchion shroud/cover. Available with tightening/releasing holes (4-off at 90 degrees).
Note: Originally, without the tightening/releasing holes, tightening required a vice or similar gripping mechanism which would potentially damage any surface finish.
Norton Dominator & Commando Handlebar Clamp Bolt Sets
Set (4-off) handlebar clamp bolts for both Norton Dominator and Commando models. Fitment:
- Dominator, 5/16 BSF 22TPI x 3/4"
- Commando, 5/16 UNF 24TPI x 3/4"
Select options
This product has multiple variants. The options may be chosen on the product page
Norton Fork Pinch Stud
L.H. fork pinch stud, nut and thick washer. Cycle (CEI) thread screws into L.H. for clamp spindle.
Note: Some Dominator models may have 5/16-UNC threads if not original.
Select options
This product has multiple variants. The options may be chosen on the product page
Norton Front Wheel Spindle ‘Round’ Type
Front wheel spindle 'round' type with 'tommy' bar hole.
Fitment:
- 7" wide yokes, 9/16-20 TPI = Pre-1964 narrow type forks (Dominator, ES2, etc ...) (20249)
- 7-3/8" wide yokes 9/16-20 TPI = Later Dominators 1964 onwards and AMC Hybrids (03-0055)
- 7-3/8" wide yokes 9/16-18 TPI = Commando and some very late Dominators
Select options
This product has multiple variants. The options may be chosen on the product page
Norton Front Wheel Spindle Nut
Front wheel spindle nut. Fitment:
- 9/16-20 TPI = Early machines, Dominator, ATLAS, etc ... models.
- 9/16-18 TPI = Commandos
Select options
This product has multiple variants. The options may be chosen on the product page
Norton Headlamp Spacer