Lightweight Norton Brake Rod Assembly

£31.00
Complete brake rod assembly for Jubilee, Navigator and Electra. This type has a winged brake adjuster, and the original shape of clevis joint. Because the frame and cycle parts were developed from Francis Barnet, and James motorcycles, it may be found correct for some of these as well. Overall length: 21-1/2"

Lower Yoke Pinch Studs

£11.20
Lower yoke pinch stud set 7/16-20 TPI, including narrow washers and reduced hex plain nuts. Overall length, 2.14"

Lucas Headlamp Bolts

£7.00
Polished Lucas headlamp bolts (2-off) 5/16-26TPI Cycle (CEI). Alternative option for modern headlamp, 5/16-24TPI is available.  Select option required.
Select options This product has multiple variants. The options may be chosen on the product page

Mudguard Stay Spacer

£2.80
Slimline 'D' shaped mudguard stay spacer/packer, as originally fitted to ATLAS, Dominator models. Spacers when fitted avoid the buckling of the beaded edge mudguard during tightening.  2 or 4 are typically required depending upon fitment.

Norton Oil Tank Stud

£3.20
Norton oil tanks stud.  5/16"-26TPI,  1 -1/16" overall length. Priced each, 2-off  required.

Norton Anchor Bolt

£8.50
Anchor bolt, full nut and washer for primary chain adjuster (fixed to engine plate).

Norton Battery Box Screw

£5.25
These screws go on the left hand side of all but the very early Featherbed models, including Dominators, Atlas, and the late M50 and ES2 singles in this frame. Included are the split pin and washer, to make it captive.

Norton Big 4 16H Cylinder Base Nut and Washer

£5.50
Early Norton Big 4 and 16H (1930's- 1957) deep hex cylinder base nut and thick washer.