Lucas Headlamp Bolts - Image 1
Lucas Headlamp Bolts - Image 2
Lucas Headlamp Bolts
Lucas Headlamp Bolts - Image 2
Fork Damper Tube Bolts
Fork Damper Tube Bolts £10.90
Back to products
Fork Oil Slider Drain Screws
Fork Oil Slider Drain Screws £5.40
BSA Norton Triumph

Lucas Headlamp Bolts

£9.00

Polished Lucas headlamp bolts (2-off) 5/16-26TPI cycle (or CEI).  These fit most BSA, Norton and Triumph (99-1004, 06-8039) marques.

Alternative option for modern headlamp, 5/16-24TPI UNF is available.  Select option as required.

Compare
Add to wishlist
SKU: 11-2201 Categories: , , , , , , , Tags: , , , , ,
Description

Polished Lucas headlamp bolts (2-off) 5/16-26TPI cycle (or CEI).  These fit most BSA, Norton and Triumph (99-1004, 06-8039) marques.

Alternative option for modern headlamp, 5/16-24TPI UNF is available.  Select option as required.

Related products

Compare

BSA Handlebar Clamp Spacer

,
£4.80

These spacers (2-off) are used with the long clamp screw used on models which incorporate a steering damper.  Two short + two of these longer screws are required. They fit under the Damper Knob Securing Plate.

Add to wishlist
Compare

Fork Seal Holders BSA

,
£95.00

These Fork Seal Holders fit most BSA's from 250cc and upwards, from 1946, until around 1970. They have modern seals, that are already fitted. Priced as a set of 2.

Add to wishlist
Compare

Front Brake Fulcrum For 190mm Front Hub BSA

,
£20.65

For 190mm front hub only, as fitted to DBD Gold Stars, and some A65 models. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

,
£18.50

For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

Add to wishlist
Compare

Front Brake Lever, 8″ Full Width Hub, A7 & A10

,
£12.50

This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

Add to wishlist
Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist
Compare

Steering Damper Knob Securing Plate-BSA

,
£15.00

This secures the adjuster knob in place after adjustment.

Add to wishlist