We will unfortunately NOT be at the next Kempton autojumble - September 19th 2026
Shouldered Brake Trunnion
Silencer Clamp 1-1/2″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
Silencer Clamp 1-3/4″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters
Silencer Clamp 1-5/8″ diameter
This silencer clamp is a substantial design, suitable for clamping silencers on to pipes, on cars and motorcycles. It is based on a 1950's pattern, used on many motorcycles of that era, and can be re-used many times. It is simple to replace the 1/4-UNF bolt and nut, if ever needed. It is available in other diameters.
Slickshift Midway Clutch Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us.
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type with the midway angled cable abutment, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Select options
This product has multiple variants. The options may be chosen on the product page
Slickshift Triumph Pre-Unit Gearbox Adjuster Set
For other variations please Contact Us
Triumph pre-unit construction single sided plain adjuster set, this is the 'slickshift' adjuster set type, however please select the type required should you need longer stud needed for alloy (thicker) plates or larger abutment pin (3/8" nut).
Set comprises: stud, long stud nut, short stud nut (LHS), serrated washer, plain adjuster (5" long), 2 off-nuts, abutment pin (small type).
Select options
This product has multiple variants. The options may be chosen on the product page
Hex
T140 Foot Rest Bolt Set
Hex
T140 Front Disc Hub Bolt Set
Suitable bolt set for the T140 3-piece front disc hub (not Leicester wheel), 1976-1985. Comprises of 4-off 3/8" UNF hex head bolts complete with washers (4-off) and locking nuts (4-off).
Have you seen the broader range of T140 components available ? if no, take a look.
T140 Left Hand Swingarm Spacer
Hex