Show sidebar
Show 9 12 18 24
Add to compare

Triumph 3/8″ UNF Side Stand Bolt

,
£8.60
Triumph side stand/prop stand bolt (F7021), 3/8" UNF thread. Suitable for a large range of Triumph models including the T100, T120 and TR6 models from 1967 onwards including all T140, TR7, T150, T160, TSS and TSX.
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph 3T and T85 Pre-Unit Footrest Stud Assembly

,
£13.00
This set comprises the long stud, two nuts and washers, to hold on the footrests, suitable only for 3T and T85 models. Overall length is 11-3/4", 20TPI.
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph 3TA 5TA Steering Yoke Stops

,
£13.00
A set (2-off), Triumph steering/yoke fork  stops, fitted to the frame to provide a steering stop for the yokes. 3/8" CEI is suitable for most Triumph 3TA and 5TA.  
Add to wishlist
Add to basket
Quick view
Black square stainless classics coming soon image.
Add to compare

Triumph and BSA Centre Yoke Stem Nut 1969-72

, , ,
£20.00
Polished Triumph centre stem/yoke nut with damper hole.  Suitable for Triumph Trident T150 models fitted with the damper during 1971
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph and BSA OIF Tank Mounting Bolt

, , ,
£15.00
Suitable for all Triumph 650 OIF "Oil in Frame" twins, Bonneville, T120R, Tiger, TR6, TR6RV, Trophy, etc from 1971-1972 fitted with the centre locking rib on the down tube frame. Additionally the bolt is also suitable for BSA A65 Twins (Lightning, Thunderbolt & Firebird Scrambler) from 1971-1972. Measure 3.760" UH
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph Centre Stand Bolt Set 1/2″

,
£19.00
Triumph main stand / centre (center) (F2725, F5678, F5679) stand set, comprising of 2-off bolts, washers and slim nuts.  Suitable Triumph T120 models up to 1968, T100 models 1963-74. 1/2" CEI-20 TPI
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph Centre Stand Bolt Set 7/16″

,
£15.00
Triumph main stand / centre (center) stand set, comprising of 2-off bolts, washers and slim nuts.  Suitable Triumph twins (T120, TR6, etc ..) and triples (Tridents) T150,T160, 1968/69 onwards. 7/16" UNF-20 TPI
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph Fuel Tank Mounting Cupped Washer Set

,
£7.60
Pair (2-off) cupped tank mounting washers. Fitted underneath the front of the tank and use across both unit and pre-unit models from 1963-on. OD: 1.125", between internal lip/edge, 1" ID: .38"
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph Pre-Unit and Duplex Footrest Stud Assembly

,
£12.80
This set comprises the long stud, two nuts and washers, to hold on the footrests, suitable for all swinging arm models from 1954 to 1962 which includes the duplex models. Overall length is 11-1/4", 20TPI.
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph Pre-Unit Centre Stand Bolt Set 1/2″

,
£16.00
Triumph main stand / centre (center) stand set, comprising of 2-off bolts (F3619) and slim nuts (F2725).  Suitable Triumph pre-unit 500/650cc models, 1954-1959. 1/2" CEI-20TPI
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph pre-Unit Centre Stand Spring

, ,
£6.40
Triumph pre-unit centre stand spring. Suitable for swingarm 650cc models 1954-60, including 350/500cc models.
Add to wishlist
Add to basket
Quick view
Add to compare

Triumph Pre-Unit Gearbox Adjuster Set

,
Price range: £60.30 through £63.00
Triumph pre-unit construction single sided plain adjuster set, this is a common adjuster set, however please select the type required should you need longer stud needed for alloy (thicker) plates. Set comprises:
  • Stud (item 19)
  • Long stud nut (22) - Note: shown short in diagram.
  • Short stud nut (20) LHS
  • Serrated washer (21) - Note: Serrations face engine plate outer surface.
  • Plain adjuster (23) - 5" long
  • 2-off reduced hex nuts (25)
  • Abutment pin (26, 27,  28) - small type or large as chosen.
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view