Black square stainless classics coming soon image.
Click to enlarge
Triumph T140D Alloy Wheel Spindle 9-15/16"
Triumph T140D Alloy Wheel Spindle 9-15/16" £44.00
Back to products
Norton Chaincase Washer
Norton Chaincase Washer £12.95
BSA Triumph

Triumph and BSA Centre Yoke Stem Nut 1969-72

£20.00

10 in stock

Compare
Add to wishlist
SKU: 97-4159 Categories: , , , Tags: , ,
Description

Polished Triumph centre stem/yoke nut with damper hole.  Suitable for Triumph Trident T150 models fitted with the damper during 1971 early 1972.  Also fitted to BSA Rocket 3 (III) models between 1969-1972.

You may also like…

Compare

Triumph 3/8″ UNF Side Stand Bolt

,
£8.60

Triumph side stand/prop stand bolt (F7021), 3/8" UNF thread.

Suitable for a large range of Triumph models including the T100, T120 and TR6 models from 1967 onwards including all T140, TR7, T150, T160, TSS and TSX.

Add to wishlist
Add to basket
Quick view
Sold out
Compare

Triumph T140 P-Clamp Upper and Lower Mounting Washer Set

,
£21.00

Set (4 off) of upper and lower handlebar P-clamp mounting washers.

Lower cup (97-2221) and upper hemispherical (97-1529) washer, suitable for all OIF T140 models, T150 and T160 marques.  Will fit most 500/650/750cc models.

Add to wishlist
Read more
Quick view
Compare

Triumph Trident Crankcase Timing Plug

, , ,
£6.50

Timing crankcase plug (bolt), suitable for both the T150, T160, A75 (X75) Trident models.

9/16″-12 UNC

Add to wishlist
Add to basket
Quick view

    Related products

    Compare

    BSA A7 & A10 Rear Dummy Spindle

    ,
    £35.00

    This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00

    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    BSA Top Yoke Extended Nut

    ,
    £5.50

    This nut fits on to the top yoke bolt, and the extended hexagon gives improved access to the spanner. At one time fitted to all models from 250cc and upwards.  Also listed as part no. 64-6016.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Brake Lever, 8″ Full Width Hub, A7 & A10

    ,
    £12.50

    This brake lever is used on the Later A7 & A10 BSA`s of the 50's & early 60's, which have the full width alloy hub.

    Add to wishlist
    Add to basket
    Quick view
    Compare

    Front Hub Spindle, Single Sided Hub BSA

    ,
    £32.00

    This spindle is for the early Gold Stars and many other single cylinder machines with Rigid frames and some plunger suspension models. The thread, which screws into the fork end is LEFT hand.

    Add to wishlist
    Add to basket
    Quick view