Steering Damper Star Washer: BSA "A" & "B" Series Models - Image 1
Steering Damper Centre: BSA "A" & "B" Series Models
Steering Damper Centre: BSA "A" & "B" Series Models £8.50
Back to products
Steering Stem Sleeve Cap: BSA & Ariel: No Damper
Steering Stem Sleeve Cap: BSA & Ariel: No Damper £15.00

Steering Damper Star Washer: BSA “A” & “B” Series Models

£9.50

This star washer is part of the steering damper assembly, fitted under the lower steering yoke.

103 in stock (can be backordered)

Compare
Add to wishlist
SKU: 25-5247 Categories: , Tags: , , ,
Description

This star washer is part of the steering damper assembly, fitted under the lower steering yoke.

You may also like…

Compare

Steering Damper Backing Plate: BSA “A” & “B” Series Models

,
£7.80

The metal backing plate was part of the steering damper assembly and fits on to the Steering Damper Centre, p/n 65-5328, on some models.

Add to wishlist
Compare

Steering Damper Centre: BSA “A” & “B” Series Models

,
£8.50

This is part of the steering damper assembly, fitted under the lower steering yoke.  The damper rod, if fitted, screws into it.

Add to wishlist

    Related products

    Compare

    A10 Gold Star Fork Top Nut

    ,
    £14.50

    These are nearly identical to the "A65"- type, except that they are drilled out internally to .800 dia. They fit a very wide variety of different BSA models, being identical to original fitments.

    Add to wishlist
    Compare

    BSA A7 & A10 Front Spindle (full width)

    ,
    £41.80

    This front spindle is made for all the A10`s & A7`s with the late full width 7" & 8" full width alloy front hubs.

    Add to wishlist
    Compare

    BSA and Triumph Fork Top Nut Washers

    ,
    £5.00

    These washers (2-off) fit the two main types of fork top nuts in the BSA range, and may also be found useful if washers are needed under most of the Triumph fork top nuts of the period. The internal diameter of the washer is 1.067".

    Add to wishlist
    Compare

    BSA Handlebar Clamps for BSA “A ” and “B” Models

    ,
    £34.00

    A high quality reproduction set of 2 handlebar clamps suitable for virtually all BSA's, from the '40's to the early '70's, fitted to models from 250cc and upwards.

    Add to wishlist
    Compare

    Front Brake Fulcrum For 7 & 8″ (Single Sided) Front Hub BSA

    ,
    £18.50

    For 7 & 8" Single sided  front hub only, as fitted to early Gold Stars, B31, B33, etc. Complete with nut and washer. This version is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Sold out
    Compare

    Front Brake Fulcrum For A7 & A10 BSA

    ,
    £18.50

    For BSA A7 & A10 with full width front hub. Complete with nut & washer. It is tapped 5/16"-26 for the cable adjuster.

    Add to wishlist
    Compare

    Handlebar Clamp Screw BSA

    ,
    £2.80

    These are the normal short clamp screws, used on most models.

    Add to wishlist
    Compare

    Steering Stem Sleeve Cap: BSA & Ariel: No Damper

    ,
    £15.00

    This cap is fitted on a few models where there is no need for a central hole, when no steering damper is fitted.  Otherwise, it is identical to the part fitted to later A10 and Gold Star.

    Add to wishlist